Eternus Assault Armor Multipart Kit w/ Pre-Drilled Magnet Holes
SKU:220481-WP8
SAVE MONEY: 3D Printed items ship separately from other store items for their own free or combinable shipping charge.
Couldn't load pickup availability
Share
Details
Eternus Assault Armors are the main assault mech used by all the chapels of Battle Brothers across the Galaxy. Only the greatest warriors can be selected as pilots but at a great cost, they must renounce their humanity and be permanently hardwired into the Assault Armor's chassis for the countless eons of its service.
The Eternus Assault Armor is a Multipart kit designed for resin printers. Fully assembled it stands 7cm tall (about 3-1/2") and is a comparable size to a Contemptor Dreadnought. It can be assembled in a wide range of poses with many weapons and customization options including double weapon load-outs (sold separately). Its arms and weapons come pre-drilled for magnets to make them interchangeable for future-proofing your miniature.
For less than $40 you can have a double weapon-wielding Contemptor alternative that looks great on the tabletop.
- This kit comes with your choice of shooting weapon for the model's right arm, and both a powered fist, and claw for the left one.
- It also comes with the reliquary and, missile launcher top bits- plus four different head options.
- Additional weapon options and accessories outlined in red are also available separately.
This listing is for the multi-part kit of the "Eternus Assault Armor" that can be assembled in a wide range of poses, has many different weapon configurations and customization options. Perfect as a centerpiece for your tabletop army, as a cool display piece on your desk, or even as parts for use in your conversions!
Above are images of an actual print after being primed with Uniform Grey from The Army Painter, along with a comparison shot of a Contemptor class model, and a Primaris marine.
Assembly instructions are in the image gallery in this listing. To assemble the Eternus Assault Armor with magnets for switching weapons you will need the following sizes (all measurements are diameter x depth):
- Elbow Joints: top arm 1/4" x 1/16", bottom arm 1/4 x 1/32" per arm
- Wrist Joints require two 1/4" x 1/32" per arm
- Top Missile Launcher requires two 1/8" x 1/16" magnets
- Each Weapon will require a 1/4" x 1/16" and a 1/4" x 1/32" magnet along with two smaller 1/8" x 1/16" and 1/8" x 1/32" magnets to prevent torquing.
- You can also use a small strip of tin (instead of the 1/32 depth magnets) to attach the arm weapon mounts to the guns if available (see image below).
The kit also comes with two plugs to use for elbow joints if you decide to assemble your Eternus without any magnets as well!
Prints are officially licensed by Antonis Bouras, If you are after just the .STL files, click here to get them on Antonis Bouras' Art Station right now!
Miniatures Sales & Marketing Contracted Through Spikey Bits, and Fulfilled By Slicer LLC.
Make & Care
Our 3D-printed parts are crafted using high-definition resin at a 25-micron layer height, ensuring exceptional detail and quality far beyond standard resin prints.
To provide maximum protection during shipping, your parts will arrive with supports still attached. But don't worry—removing them is a straightforward process! Simply apply gentle heat and follow our step-by-step tutorial guide (watch here) to easily remove the supports without damaging the parts. We recommend starting with a non-essential area to get comfortable with the process.
Once the supports are removed, you may notice some minor remnants that can be easily smoothed out with additional finishing before priming, especially on smaller or more delicate parts. With a little care and patience, your models will be ready for painting and assembly in no time!
It is recommended to wear appropriate protective equipment when sanding resin. Unless otherwise specified, these items will require assembly, either as their own model or as an upgrade for an existing kit. For best results, gel superglue is recommended.
The image shown is the stock photo of the rendered miniature, while painted models are for reference only and not included.
If you have any questions, we're here to help—happy hobbying!
Any product names, logos, brands, or trademarks mentioned in this listing are used solely to describe compatibility and are the property of their respective trademark holders. These trademark holders are not affiliated with Spikey Bits or its suppliers and do not endorse or sponsor Spikey Bits or its products.
































Great looking kit with lots if detail and options at a good price. I magnetized the weapons to give it many opotions.
Great looking kit with lots if detail and options at a good price. I magnetized the weapons to give it many opotions.