50pcs Flush-Fit Base Magnets The Old World
SKU:MBRE4522
These items ship separately from The Magnet Baron's store and will incur a combinable $4.99 shipping charge. Please use this link to contact them for order inquires.
Couldn't load pickup availability
Share
Details
What size magnets for The Old World bases you ask? These sizes! The 2.2mm and 2.6mm heights are the critical measurements that allows them to be flush to the base, not too tall or too short.
Use these to mount your miniatures to magnetic movement trays, cookie sheets, Magna Racks, Table War case, etc.
Use the following size for each base. Thick magnets are 2.6mm thick, which won't sit flush under a 120mm base. You can always use 2 of the thinner magnets on a 40mm base to get a stronger hold rather than buying a whole pack just for 1 or 2 character models.
25mm Medium Thick (4.5x2.6mm)
Cavalry & Monsters Medium (4.5x2.2mm)
2 magnets are recommended for cavalry and 3 magnets for monsters.
Some of you may recognize these sizes from the 40k and Age of Sigmar flush-fit page, they are the exact same magnets BUT the smaller bases use thicks in The Old World and the larger bases use 2.2mm magnets, which is inverted.
Looking for what size base magnets you need look here.
Rare Earth magnets are the strongest magnets in the world. These magnets have pull several times their weight.
You receive:
|
Shape |
Disc |
|
Quantity |
50 |
|
Diameter |
6mm or 4.5mm |
|
Height |
2mm, 2.2mm or 2.6mm |
|
Grade |
N52 |
|
Finish |
Nickel Copper Nickel |
|
Material |
NdFeB (Neodymium Iron Boron) |
These incredible magnets are great for anything that you would use Velcro, brass fasteners, hinges, pins, etc.
My clients range from craft companies to hobbyists to painter to carpenters to purse makers. These little magnets have MILLIONS of applications.
WARNING!
These magnets should be kept away from any animal or human who might try and eat them, they have the potential to separate and pinch intestines causing serious and life threatening complications.
BRITTLE!
These magnets are more brittle than glass, please make sure you don’t let them slam into each other or drop onto the floor, they WILL break and I will be sad for you.
Let me know if you have any questions!
Make & Care
Our 3D-printed parts are crafted using high-definition resin at a 25-micron layer height, ensuring exceptional detail and quality far beyond standard resin prints.
To provide maximum protection during shipping, your parts will arrive with supports still attached. But don't worry—removing them is a straightforward process!
Simply apply gentle pressure to easily remove the supports without damaging the parts. We recommend starting with a non-essential area to get comfortable with the process.
Once the supports are removed, you may notice some minor remnants that can be easily smoothed out with additional finishing before priming, especially on smaller or more delicate parts. With a little care and patience, your models will be ready for painting and assembly in no time!
It is recommended to wear appropriate protective equipment when sanding resin. Unless otherwise specified, these items will require assembly, either as their own model or as an upgrade for an existing kit. For best results, gel superglue is recommended.
The image shown is the stock photo of the rendered miniature, while painted models are for reference only and not included.
If you have any questions, we're here to help—happy hobbying!
Any product names, logos, brands, or trademarks mentioned in this listing are used solely to describe compatibility and are the property of their respective trademark holders. These trademark holders are not affiliated with Spikey Bits or its suppliers and do not endorse or sponsor Spikey Bits or its products.
